Introduction of Telecomunication technology

The first radiotelephone service was introduced in the US at the end of the 1940s, and was meant to connect mobile users in cars to the public fixed network. In the 1960s, a new system launched by Bell Systems, called Improved Mobile Telephone Service” (IMTS), brought many improvements like direct dialing and higher bandwidth. The first analog cellular systems were based on IMTS and developed in the late 1960s and early 1970s. The systems were “cellular” because coverage areas were split into smaller areas or “cells”, each of which is served by a low power transmitter and receiver.

This first generation (1G) analog system for mobile communications saw two key improvements during the 1970s: the invention of the microprocessor and the digitization of the control link between the mobilephone and the cell site.

Second generation (2G) digital cellular systems were first developed at the end of the 1980s. These systems digitized not only the control link but also the voice signal. The new system provided better quality and higher capacity at lower cost to consumers.

Third generation (3G) systems promise faster communications services, including voice, fax and Internet, anytime and anywhere with seamless global roaming. ITU’s IMT-2000 global standard for 3G has opened the way to enabling innovative applications and services (e.g. multimedia entertainment, infotainment and location-based services, among others). The first 3G network was deployed in Japan in 2001. 2.5G networks, such as GPRS (Global Packet Radio Service) are already available in some parts of Europe.

Work has already begun on the development of fourth generation (4G) technologies in Japan.

It is to be noted that analog and digital systems, 1G and 2G, still co-exist in many areas.



The Basics of Cellular Technology and the Use of the Radio Spectrum

Mobile operators use radio spectrum to provide their services. Spectrum is generally considered a scarce resource, and has been allocated as such. It has traditionally been shared by a number of industries, including broadcasting, mobile communications and the military. At the World Radio Conference (WRC) in 1993, spectrum allocations for 2G mobile were agreed based on expected demand growth at the time. At WRC 2000, the resolutions of the WRC expanded significantly the spectrum capacity to be used for 3G, by allowing the use of current 2G spectrum blocks for 3G technology and allocating 3G spectrum to an upper limit of 3GHz.

Before the advent of cellular technology, capacity was enhanced through a division of frequencies, and the resulting addition of available channels. However, this reduced the total bandwidth available to each user, affecting the quality of service. Cellular technology allowed for the division of geographical areas, rather than frequencies, leading to a more efficient use of the radio spectrum. This geographical re-use of radio channels is knows as “frequency reuse”.

In a cellular network, cells are generally organized in groups of seven to form a cluster. There is a “cell site” or “ base station” at the centre of each cell, which houses the transmitter/receiver antennae and switching equipment. The size of a cell depends on the density of subscribers in an area: for instance, in a densely populated area, the capacity of the network can be improved by reducing the size of a cell or by adding more overlapping cells. This increases the number of channels available without increasing the actual number of frequencies being used. All base stations of each cell are connected to a central point, called the Mobile Switching Office (MSO), either by fixed lines or microwave. The MSO is generally connected to the PSTN (Public Switched Telephone Network):